Toshiba Strata DK Backup - Manual (Page 169)

–––––––––––––––––––––––––––––––––––––––––––––––––– DK424 Release 4.0 Upgrade Programming Example
159 Upgrading Strata DK Systems to DK424 Release 4.0
If the DID Intercept Destination is the Kitchen Telephone (PDN 107), data in this program
must not be changed to adjust for port shifting caused by the RDDU DID line PCB in slot 13.
This is because Port 007 did not shift after the upgrade (see
Figures 33 and 34 ):
Program
*
17 data for DID lines 001~004 before the upgrade = 007
Program
*
17 data for DID lines 001~004 after the upgrade = 007
Program 20
If the Front Office Telephone (PDN 112) is equipped with an RPCI-DI to display DNIS and
Caller ID on a PC running a TAPI application, the data in Program 20 must shift. This enables
the Front Office Telephone and RPCI to operate the same way after the upgrade as it did
before. Notice that all Program 20 data for port 012 moves port to 008.
Program 30
If the Back Room Telephone (PDN 119) is programmed to dial forced and verified Account
codes when making outside calls, the data in Program 30 must shift. This is to allow the Back
Room Telephone to operate the same way after the upgrade as it did before. Notice that all
Program 30 data for port 019 moves to port 015.
Program 33
If the Front Office telephone (DN 112) is programmed to hunt to the Back Room Telephone
(PDN 119), the data in Program 33 must shift:
If the Front Office telephone (PDN112) is programmed to hunt to the Lobby Telephone
(PDN 100), the data in Program 33 must shift:
Before the Upgrade After the Upgrade
Port 008
LED17 on, all others off (Program 20
default) LED 01,02,10, 11, and 17 on, all
others off
Port 012
LED 01,02,10, 11, and 17 on, all
others off
LED17 on, all others off
Before the Upgrade After the Upgrade
Port 015
LED 01, 05, and 07 ON, all others off
(Program 30 default) LED 01, 05, 07, 08, and 14 ON, all
others off
Port 019
LED 01, 05, 07, 08, and14 on, all
others off LED 01, 05, and 07 on, all others off
(Program 30 default)
Before the Upgrade After the Upgrade
Hunt-From Port 012 to Port 019 Hunt-From Port 008 to Port 015
Before the Upgrade After the Upgrade
Hunt-From Port 012 to Port 000 Hunt-From Port 008 to Port 000