Toshiba Strata DK Backup - Manual (Page 50)

Dial DK ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
40 DKAdmin/DKBackup
2. Press Enter and the Customer List displays.
3. Highlight the desired customer, and press Enter . The DKAdmin/DKBackup Main Menu
displays.
Note If you have multiple customers, you can use the Find function to move quickly to
another customer by typing the first letter of the Customer ID number. The program
highlights the first customer which matches your entry. Press
Enter to select the
highlighted customer or re-enter.
After selecting a customer, the bottom of the DKAdmin/DKBackup Main Menu displays a
box along the bottom of the screen. This box displays important information about the
customer, including the customer name, processor type, processor software version level,
feature key installed on the processor, and the disk directory (see
Figure 6 ).
Notes
●
If the new customer is selected, the default database for the customer’s processor is loaded
into DKAdmin/DKBackup.
●
Software version Release 3 applies to Release 3 and Release 3.1 processors.
You now may use the options in the Backup Menu to check the DK Processor or Backup/
Restore Data.
Dial DK
The DKAdmin/DKBackup to Strata DK communications link can be made via modems,
Toshiba PDIUs or RPCIs, using the DKAdmin/DKBackup dialing strings (DIU, modem, and/
or After Connect).
Dialing strings are not necessary if the DKAdmin/DKBackup PC is connected directly to the
Strata DK TTY Port (see
Figure 16 on Page 130 ). Dialing Strings are set using the Maintain
Customer or Dial DK menus. DIU and Modem Initialization Strings are set from the Options/
System Installation/Communications Setup. (See
Appendix A – Connecting to Strata DK to
establish communications between the Strata DK and the DKAdmin/DKBackup PC.)
DKAdmin/DKBackup cannot be used to send or receive customer database information until a
physical communication path has been established between the Strata DK and the DKAdmin/
DKBackup PC.
Customer
Name
Processor
Type Processor
Software
Version
Feature Key
Installed on
Processor
Disk
Directory
1085DK
Figure 6 On-screen Customer Information