Toshiba Strata DK Backup - Manual (Page 22)

Step 5: Run DKAdmin Program –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
12 DKAdmin/DKBackup
●
If you upgraded an existing DKAdmin program, your customer database has been
maintained in the 280ADMIN directory.
●
If your Config.sys file is changed and you have problems with the new file when you
reboot your computer, restore the original file (i.e., Config. bak).
Step 5: Run DKAdmin Program
Note Running the program under Windows 95, 98 or Windows NT is recommended for the
best performance.
Start-up DKAdmin under Windows 98, 95 or Windows NT 4.0
➤ Click on the DKAdmin icon. The Toshiba Title screen displays.
Start-up DKAdmin in MS-DOS
1. From the C:\ prompt, type CD 280ADMIN and press Enter .
2. From the C:\280ADMIN prompt, type dkadmin and press Enter . The Toshiba Title
screen displays.
Run DKAdmin
Note If the DKAdmin red hardware key is not installed, the following message displays:
Hardware key Not Installed. Exiting to DOS. OK . Install the
DKAdmin hardware key, then retry running the program.
1. Once the Toshiba Title screen displays, press any key to continue. This message appears:
Please Enter Your User ID:
2. Type Master and press Enter . This message appears: Please Enter Your
Password.
3. Type Master and press Enter . For security, your password does not display on the
screen as you type it.
The default DKAdmin
Password File
Maintenance screen
displays (shown right).
It is recommended that
you change the MASTER
password and create any
other user passwords.
4. To change or add
passwords, see “User
Password Level Setup” on
Page 121 .
5. After completing your password setup, press Esc . The message Do You Want To
Copy User File Back On The Installation Disk? displays.