Toshiba Strata DK Backup - Manual (Page 77)

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Flexible Button Programming Section
67 Administration Menu (DKAdmin)
➤
To edit your attendant console flexible button assignments
1. Highlight the key
assignment you wish
to change and press
F6 . A feature pop-up
list displays (shown
right).
2. Use the +/- keys or
the Page Up/Page
Down keys to scroll
through the list.
Highlight the feature
you want to assign to
the key and press
Enter . The selected feature replaces the previous feature.
3. To move between the left and right key assignments, press F2 .
♦
You can only assign a feature to one button within a console. If you attempt to assign a
feature already assigned, an error message displays.
♦
Press F8 – + SD to add additional speed dial key assignments.
Important! You can only use this key when you are assigning more than one speed dial key at
a time. If you have not just added a speed dial key assignment, the message
Must
Assign System/Station Speed Dial First displays.
If you leave the cursor in the same field and continue to press F8 , the speed dial
key number increments. To add consecutive speed dial key assignments, you must
continue to highlight the next field before pressing
F8 .
4. After setting each key, press F10 to save your changes and return to the Flexible Key
Program Administration screen.
➤
To reset all keys and return them to their default settings
1. Press F5 . A message displays:
Are you sure you want to reset flexible keys?
2. Press Enter to reset the keys.
➤
To make assignments to another attendant console
1. Scroll to another attendant console ( + scrolls forward, - scrolls backward).
2. Press Esc to close the Attendant Console Flexible Button Assignments screen and return
to the Flexible Key Program Administration screen.