Toshiba Strata DK Backup - Manual (Page 170)

DK424 Release 4.0 Upgrade Programming Example –––––––––––––––––––––––––––––––––––––––––––––––––––
160 DKAdmin/DKBackup
Program *33
If the Back Room telephone (PDN 119) is programmed as the Owner of PhDN 500, the data in
Program
*
33 must shift:
Programs 39, 29, *29, and 59
When a port number shifts from XXX to YYY during an Release 4.0 upgrade, the following
Program changes must be made:
♦ In Program 39, the data set for port XXX must be copied over the data set for port YYY.
♦ In all Telephone/Console button programs, the appearances of the XXX port PDN/SDN
Button (##XXX) and DSS Button (#XXX) must be changed to ##YYY and #YYY,
respectively, on all keystrips.
Example: The Front Office Telephone changes from port 012 to port 008 during the
Release 4.0 upgrade (see
Figures 33 and 34 ).
As shown below, all the button functions of the Front Office Telephone do not change after the
upgrade, but the Program 39 codes for PDN, SDN and DSS buttons change if the associated
PDN/SDN or DSS port shifts. Also PhDN, Speed Dial, and Feature button codes do not
change when ports shift.
Programs *42-1 and *42-2
Although this example does not include an RDTU (T1) PCB, it should be noted that these
programs require an RDTU slot number entry with DK Release 4.0. DK Admin/DK Backup
automatically inserts the correct slot number for these programs during the upgrade process.
Before the Upgrade After the Upgrade
PhDN Port 500 is owned by Port 019 PhDN Port 500 is owned by Port 015
10-Button Keystrip for Front Office
Telephone on Port 012 -Before Upgrade
10-Button Keystrip for Front Office
Telephone on Port 008 -After Upgrade
Key No. Code Name Key No. Code Name
K10 497 SDS K10 497 SDS
K09 498 DND K09 498 DND
K08 *103 SD103 K08 *103 SD103
K07 *102 SD102 K07 *102 SD102
K06 *101 SD101 K06 *101 SD101
K05 #017 DSS117 K05 #013 DSS117
K04 ##500 PhDN 500 K04 ##500 PhDN 500
K03 ##019 SDN 119 K03 ##015 SDN 119
K02 #000 DSS100 K02 #000 DSS100
K01 ##012 PDN 112 K01 ##008 PDN 112