Toshiba Strata DK Backup - Manual (Page 64)

System/Station Administration –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
54 DKAdmin/DKBackup
Flexible Button Assignments (F5)
➤
To view or change flexible button assignments
1. Press F5 from the Port
Attributes screen and the
Port Flexible Key
Assignments screen
displays (shown right).
2. To change a flexible
button assignment,
highlight the Flexible
Key Assignment and
press:
♦ F5 –Pause to
deactivate or blank
out a key
assignment.
♦ F9 –Increment SD to add multiple speed dial key assignments.
Important! You can only use this key when you are assigning more than one speed dial key at
a time. If you have not just added a speed dial key assignment, the message
Must
Assign System/Station Speed Dial First displays.
If you leave the cursor in the same field and continue to press F8 , the speed dial
key number increments. To add consecutive speed dial key assignments, you must
continue to highlight the next field before pressing
F8 .
3. Press Esc to return to the Port Attributes screen.
Important!
●
After restoring flexible keys (Program 39) data, turn the DK system off for five seconds,
then turn it back on to apply the changes made.
●
If you change the keystrip type (Program 38) from the station attribute screen, all keystrip
buttons will be set to Program 38 default assignments. If you wish to change a keystrip
type (from 20 to 10, for example) and save the existing (first 10) key button assignments,
operate Program 38 from the Program Administration Section option.
➤
To copy selected keys to selected ports
1. Press Ctrl + F2 and a pop-up dialog
box displays (shown at right).
2. Press any key to continue.
3. Highlight a key and press the spacebar
to select. An asterisk appears next to
your selection. Continue until all the
keys you want to copy have been
selected.