Chapter 4 - using dkadmin/dkbackup, Before you start, Logging on – Toshiba Strata DK Backup User Manual
Page 37: Dkadmin, Using dkadmin/dkbackup
27
Using DKAdmin/DKBackup
Using DKAdmin/DKBackup
4
This chapter shows you how to log on and off DKAdmin/DKBackup, use the pull-down
menus and select system options, respond to system and error messages, and describes the
keyboard conventions used in the programs.
Before You Start
Before using DKAdmin/DKBackup, you must:
♦
Connect your personal computer to a Strata DK in order to send/receive data between the
DKAdmin/DKBackup PC and a Strata DK (see
Appendix A – Connecting to Strata DK
for procedures).
♦
Properly install the DKAdmin/DKBackup hardware key (see
Chapter 2 – Installing
DKAdmin
and
Chapter 3 – Installing DKBackup
for procedures).
♦
Correctly set your communications (see
Chapter 8 – Options Menu
).
Logging On
DKAdmin
➤
To log on to DKAdmin
1. After powering up your
computer, at the C:\
prompt type
CD
280ADMIN
and press
Enter
.
2. From the C:\280ADMIN
prompt, type
dkadmin
and press
Enter
. The
Toshiba start-up page
displays (shown right).
3. Type your User ID and
press
Enter
.
4. Type your password and
press
Enter
.