Toshiba Strata DK Backup - Manual (Page 75)

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Flexible Button Programming Section
65 Administration Menu (DKAdmin)
➤
To assign more than one speed dial number
1. Follow the procedure for changing an assigned feature and assign a station/system speed
dial number.
2. Press F8 – + SD to add additional speed dial key assignments.
Important! You can only use this key when you are assigning more than one speed dial key at
a time. If you have not just added a speed dial key assignment, the message
Must
Assign System/Station Speed Dial First displays.
If you leave the cursor in the same field and continue to press F8 , the speed dial
key number increments. To add consecutive speed dial key assignments, you must
continue to highlight the next field before pressing
F8 .
DSS Console Button Assignments
➤
To access the option
➤ Highlight the DSS
Console Button
Assignments option
and press
Enter . The
DSS Console Button
Assignments screen
displays (shown right)
which enables you to
assign features to 20
DSS console key
buttons.
➤
To reset all keys and return them
to their default settings
1. Press F5 . A message displays: Are you sure you want to reset flexible
keys?
2. Highlight Yes and press Enter to reset the keys or press Enter to terminate the
resetting.
➤ To change an assigned feature
1. Highlight the key
assignment you wish to
change and press
F6 . A
feature pop-up list
displays (shown right).
2. Highlight the feature you
want to assign to the
button and press
Enter .
Some entries (such as the
CO Line feature) require
you type a value when
making an assignment.