Texas Instruments MSP430 - Manual (Page 17)

www.ti.com Kit Contents, FET430Fx137RF900
1.11 Kit Contents, FET430Fx137RF900
• One READ ME FIRST document
• One legal notice
• One MSP430 CD-ROM
• One MSP-FET430UIF interface module
• Two target socket module
MSP-FET430F5137RF900: Two EM430F5137RF900 target socket modules. This is the PCB on which
is soldered a CC430F5137 device in a 48-pin RGZ package. A 2×7-pin male connector is also present
on the PCB
MSP-FET430F6137RF900: Two EM430F6137RF900 target socket modules. This is the PCB on which
is soldered a CC430F6137 device in a 64-pin RGC package. A 2×7-pin male connector is also present
on the PCB
• Two CC430EM battery packs
• Four AAA batteries
• Two 868-/915-MHz antennas
• Two 32.768-kHz crystals
• 18 PCB 2x4-pin headers
• One USB cable
• One 14-Pin JTAG conductor cable
1.12 Kit Contents, MSP-TS430xx
'PW14, 'L092, 'PW24, 'DW28, 'PW28, 'PW28A, 'DA38, 'QFN32x0, 'RSB40, 'DL48, 'RGZ48B, 'PM64,
'PM64A, 'RGC64B, 'RGC64USB, 'PN80, 'PN80A, 'PN80USB, 'PZ100, 'PZ100A, 'PZ100B, 'PZ5x100,
'PZ100USB
• One READ ME FIRST document
• One MSP430 CD-ROM
• One 32.768-kHz crystal from Micro Crystal (except MSP-TS430PW24)
• One target socket module
• A 2×7-pin male JTAG connector is also present on the PCB (see different setup for L092)
• One small box containing two MSP430 device samples (See table for Sample Type)
17 SLAU278F – May 2009 – Revised December 2010 Get Started Now!
Submit Documentation Feedback
© 2009–2010, Texas Instruments Incorporated