Texas Instruments MSP430 - Manual (Page 57)

www.ti.com MSP-TS430DA38
Table B-9. MSP-TS430DA38 Bill of Materials
No. per
Pos. Ref Des Description DigiKey Part No. Comment
Board
1 C1, C2 0 12pF, SMD0805 DNP
2 C7 1 10uF/10V, Tantal Size B 511-1463-2-ND
3 C5 1 100nF, SMD0805 478-3351-2-ND
4 C8 0 2.2nF, SMD0805 DNP
5 D1 1 green LED, SMD0603 475-1056-2-ND
DNP: headers and
receptacles enclosed with
"SAM1029-19-
6 J1, J2 0 19-pin header, TH kit.Keep vias free of
NDSAM1213-19-ND"
solder.: Header:
Receptacle
"J3, JP1,
Place jumpers on headers
JP4, JP5,
7 8 3-pin header, male, TH SAM1035-03-ND JP1, JP4,JP5, JP6, JP7,
JP6, JP7,
JP8, JP9; Pos 1-2
JP8, JP9"
8 JP2, JP3 2 2-pin header, male, TH SAM1035-02-ND Place jumper on header
Place on: JP1 - JP9; Pos
9 9 Jumper 15-38-1024-ND
1-2
10 JTAG 1 14-pin connector, male, TH HRP14H-ND
DNP: Keep vias free of
11 BOOTST 0 10-pin connector, male, TH
solder
Micro Crystal MS1V-T1K
DNP: Keep vias free of
12 Q1 0 Crystal 32.768kHz, C(Load) =
solder
12.5pF
13 R1, R3 2 330 Ω , SMD0805 541-330ATR-ND
14 R10, R11 0 0 Ω , SMD0805 541-000ATR-ND DNP
15 R5 1 47k Ω , SMD0805 541-47000ATR-ND
16 U1 1 Socket: IC189-0382--037 Manuf.: Yamaichi
17 PCB 1 67 x 66 mm 2 layers
Adhesive e.g., 3M Bumpons Part No. Apply to corners at bottom
18 4 ~6mm width, 2mm height
Plastic feet SJ-5302 side
DNP: enclosed with kit
19 MSP430 2 MSP430F2274IDA
supplied by TI
57 SLAU278F – May 2009 – Revised December 2010 Hardware
Submit Documentation Feedback
© 2009–2010, Texas Instruments Incorporated