Toshiba TECRA S1 - Manual (Page 112)

3 Diagnostic Programs 3.7 Storage
38 TECRA S1Maintenance Manual
Retry--Specify the maximum retrying times whether the operation fails.
4. Controller Check
Check the HDD controller’s status, including HDD interrupt and unexpected
interrupt.
5. Diagnostic Read/Write
This test item is a quick test to verify whether the HDD could be correctly
accessed and the user could specify the percentage in the below dialog.
Percent (1-100)-- Specify the coverage rate in percentage of the total disk.
6. SMART Test
SMART stands for Self-Monitoring, Analysis and Reporting Technology.
SMART test will compare the attribute values with the threshold value in the
HDD’s controller to confirm whether there is any failure in the HDD
Subtest 02 CDROM
The CDROM test runs on IDE CDROM/DVD-ROM & CD-RW, it will check the
CDROM driver’s functionality and performance.
1. Controller Test
Check the CDROM controller’s status.
2. Data Transfer Rate
Check the data transfer rate of the CDROM drive. It will read data from the
CDROM disc and calculate the data transfer rate. This test needs a data CD.