Toshiba TECRA S1 - Manual (Page 44)

2.3 Power Supply 2 Troubleshooting
TECRA S1 Maintenance Manual 2-7
DC IN LED
DC IN LED Power supply status
On in green DC power being supplied (from the AC adapter)
Off Else
If the DC IN LED off, follow the steps below:
1. Remove the battery pack and the AC adapter to shut off power supply to the
computer.
2. Attach the battery and AC adapter back again.
If the LED still off, follow the steps below:
Check 1 Make sure the DC IN LED goes on in green. If it does not, go to Procedure 2.
Check 2 Make sure the Battery LED goes on in orange or green. If it does not, go to
Procedure 3.