Toshiba TECRA S1 - Manual (Page 192)

4 Replacement Procedures 4.11 Bluetooth
4-44 TECRA S1 Maintenance Manual
4.11 Bluetooth Card
Removing the Bluetooth Card
Remove the Bluetooth card according to the following procedures and Figures 4-28.
1. Remove one M2x3 white flat-head screw.
2. Disconnect the antenna cable with the tweezers.
CAUTION: Do not touch the connectors on the Bluetooth card and in the computer with
bare hands. Bluetooth cards can fail if they are contaminated with sweat, natural oils, etc.
from your hands.
Figure 4-28 Removing the Bluetooth card
3. Disconnect the SUMI-cards (flat cables) from CN2 on the system board.
4. Remove the Bluetooth card.