Toshiba TECRA S1 User Manual
Page 139
3.11Error Codes and Description
3 Diagnostic Programs
TECRA S1Maintenance Manual
65
04
Data Line Test Fail
Data Line Test fails.
As above.
05xx
Mouse
04 PS2 Mouse Test Fail
PS2 Mouse Test fails.
Replace the mouse.
05 Dual Point Test Fail
Dual Point Test fails.
Check the mouse connection and
repeat the test.
30xx
SDCard
01 PCI Device No Exist
SD Card controller does not
exist.
Install the SD Card controller.
02 SD Card No Exist
No SD Card is inserted.
Insert the SD Card.
03 Initial SD Card Error
No SD Card is inserted or the SD
Card is damaged.
Replace the SD Card and repeat
the test.
04 Write SD Card Error
As above.
As above.
05 Read SD Card Error
As above.
As above.
06 Compare data Error
As above.
As above.
07 Lock Function Fail
As above.
As above.
14xx
IrDA
Test
01 2400BPS Test Error
Failure with the infrared port or
the configuration program is not
executed.
Rerun the configuration program
or check the infrared port.
02 4800BPS Test Error
As above.
As above.
03 9600BPS Test Error
As above.
As above.
04 19200BPS Test Error
As above.
As above.
05 38400BPS Test Error
As above.
As above.
06 57600BPS Test Error
As above.
As above.
07 115200BPS Test Error
As above.
As above.
08 0.576MBPS Test Error
As above.
As above.
09 1.152MBPS Test Error
As above.
As above.
10 4.000MBPS Test Error
As above.
As above.
11 Connect time out
Failure with the infrared port or
the configuration program is not
executed.
Rerun the configuration program
or check the infrared port. Check
the master.
20xx
IDE-HDD
01 Get Parameter Fail !
Wrong test parameters are input
by user.
Reinput the correct parameters.
02 Write Pattern Error
HD is damaged.
Send the HD for repair.
03 Data Compare Error
HD is damaged.
As above.
04 Read Verify Error
HD is damaged.
As above.