Toshiba TECRA S1 - Manual (Page 187)

4.9 Keyboard 4 Replacement Procedures
TECRA S1 Maintenance Manual 4-39
4.9 Keyboard
Removing the Keyboard
Remove the keyboard according to the following procedures and Figures 4-23, 4-24, and
4-25.
CAUTION: To avoid fingernail damage, do not pull out the switch cover by clamping it
with your fingernails.
1. Turn the computer upside down.
2. Remove two M2.5x12 black bind screws.
Figure 4-23 Removing the switch cover
3. Restore the normal computer placement and open the display panel. Remove the
switch cover.
4. Release the following 6 latches on the switch cover, in that order:
- Three bottom latches
- One latch on the left and right sides
- One middle latches