Toshiba TECRA S1 - Manual (Page 140)

3 Diagnostic Programs 3.11Error Codes and Description
66 TECRA S1Maintenance Manual
05 Seek Error HD is damaged. As above.
06
Disk Controller Self Test
Failed
The HD controller is damaged. As above.
07
Disk Controller Test
unexpected interrupt
Failed
The HD controller is damaged. As above.
09
Disk Controller action
Test Failed
The HD controller is damaged. As above.
10
Disk dos not support
SMART
Disk dos not support SMART
Change HD which supported
SMART and test again
11
Disk read attribute
threshold error Disk read attribute threshold
error
Send the HD for repair.
12
Disk read attribute value
error
Disk read attribute value error As above.
13
Disk SMART attribute
value error Disk SMART attribute value
error
As above.
21xx IDE-CDROM
01
No Disk in CDROM No disk is found in the CD-
ROM. Insert a disk into the CD-ROM.
02
The Disk in CDROM is
not Data Disk The disk in the CD-ROM is not
Data Disk. Insert a DATA CD.
03
IDE-CD Controller Error Functional errors with the CD-
ROM.
Send the CD-ROM for repair.
04
CD Read Error Either the disk or the CD-ROM
is damaged. Replace the disk or send the CD-
ROM for repair.
05
The Disk in CDROM is
not Audio-CD The disk in the CD-ROM is not
Audio-CD. Insert an Audio-CD.
06
Audio-CD Play Error Errors with the Audio-CD
playing. Replace the Audio-CD or send
the CD-ROM for repair.
07
CD Seek Error Either the disk or the CD-ROM
is damaged. Replace the disk or send the CD-
ROM for repair.
08
The Disk in CDROM is
not CD-RW The Disk in CDROM is not CD-
RW Replace a CD-RW disk with
Direct CD format or send the CD-
ROM for repair.
09 Eject Error Wrong CD-ROM drive. Exit from the wrong drive.