Toshiba TECRA S1 - Manual (Page 134)

3 Diagnostic Programs 3.11Error Codes and Description
60 TECRA S1Maintenance Manual
07
Update-ended Interrupt
Error R/W errors with the RTC
refreshing interrupt controller.
As above.
08 RTC Alarm Error
The PC speaker's sound source --
-counter/timer 8253 can not
produce corresponding timing
signal.
As above.
12
System Board Speaker
Error The Speaker can not sound
normally.
Check the volume tuner.
13 PCI Bus Error No PCI. Check the board.
14 PCI Bus Scan Error PCI test fails. As above.
15 PCI Device Access Error PCI access fails. As above.
16
PCI Config Verification
Error
Wrong PCI configuration.
Check PCI configuration on main
board or PCI Device
configuration.
17 PCI to ISA Bridge Error PCI-ISA bridge errors.
Repeat multiple times. If there is
always the same error, replace the
board.
18 ESCD Error ESCD errors. As above.
34
Power Management
functionality Test Fail Power management functionality
test fails.
Repeat multiple times. If there is
always the same error, replace the
board.
51 No Find RSDP No RSDP is found. As above.
52 Address Map Test Error Errors with the Address Map test. As above.
53 ACPI Table Test Error Errors with the ACPI table test. As above.
34xx FAN
01 Fan Slow Speed Test Fail The fan slow speed test fails. Check the FAN connection.
02 Fan Stop Test Fail The fan stop test fails. As above.
03 Fan Fast Speed Test Fail The fan fast speed test fails. As above.
04xx Video
01 Text Attribute Error
Physical problems with the video
card.
Check whether there is any
physical problem with the video
card.
02 Text Page Selection Error As above. As above.
03 Text Color Error As above. As above.
04 Text Mode Error As above. As above.