Westell Technologies Versalink 327W - Manual (Page 115)

030-300500 Rev. A 115 October 2006
User Guide VersaLink™ Gateway (Model 327W)
13. SETTING UP ADVANCED SERVICE CONFIGURATION
You can set up additional Service Configuration options for VersaLink that allow you to enter the port forwarding
and trigger ports ranges of your choice. Go to Configuration at the homepage menu and select Services.
When you click on define custom service in the Service Configuration screen, the Custom Service screen will
guide you through the steps of creating an advanced NAT service entry via the define custom service button.
NOTE: Westell strongly recommends that you do not change any values in this section. If you experience any
problems, please reset VersaLink via the external hardware reset button or the procedure defined under the
Maintenance menu.
Port Forwarding Ranges of Ports This option allows you to forward a range of WAN ports to an IP address on
the LAN.
Trigger Ports This option allows you to forward a range of ports to an IP address on the
LAN only after specific outbound traffic.