Westell Technologies Versalink 327W User Manual
Page 91
030-300500 Rev. A
91
October 2006
User Guide
VersaLink™ Gateway (Model 327W)
If you click on OK in the preceding pop-up screen, the following screen will be displayed. Click on OK. If you
click on Cancel, the change will not take effect.
If you clicked on OK in the preceding pop-up screen, the following pop-up screen will appear. VersaLink must be
reset to allow the new configuration to take effect. Click on OK.
If you clicked on OK in the preceding screen, the following screen will be displayed. VersaLink will be reset and
the new configuration will take effect.
After VersaLink has been reset, the DSL LED will be OFF. This is because the DSL transceiver has now been
disabled. However, the Power, Ethernet, and Wireless LEDs will remain lit.