Westell Technologies Versalink 327W - Manual (Page 85)

030-300500 Rev. A 85 October 2006
User Guide VersaLink™ Gateway (Model 327W)
12.6 Advanced WAN
This section explains the configurable features of VersaLink that are available if you select Advanced WAN from
the Configuration menu.
NOTE: If VersaLink is configured for ETHERNET PORT 1, QOS will not be displayed. You must configure
VersaLink for DSLATM PORT to access QOS in the Advanced WAN drop-down menu. Refer to section 12.6.2.1
for details.
12.6.1 ATM Loopbacks
If you select ATM Loopbacks from the Configuration menu, the following settings will be displayed.
NOTE: When the Enable ATM 0/21 box is checked, this feature is enabled. If the box does not display a check
mark, this feature is disabled. If you change the setting in this screen, you must click on save. Westell does not
recommend that you change this setting.
Enable ATM 0/21 Loopback: Factory Default = ENABLED
This option enables the 0/21 loopback , which is used by your ISP.
NOTE: Westell does not recommend that you change this setting.