Westell Technologies Versalink 327W - Manual (Page 21)

030-300500 Rev. A 21 October 2006
User Guide VersaLink™ Gateway (Model 327W)
If you changed the VPI/VCI settings and clicked done in the SET-UP COMPLETE screen, the following pop-up
screen will appear. Click OK.
NOTE: The following pop-up will appear only if you have changed the VPI, VCI, or Protocol values in the
preceding screens. If you did not change any of these values, this pop-up screen will not appear and the Gateway
will not be reset. If your Gateway’s connection setting is set to “Always On” and you have changes any of these
values, the Gateway will reset automatically. For instructions on editing your connection settings, see section 10.2.
If you clicked OK in the pop-up, the following screen will be displayed. VersaLink™ will be reset and the new
configuration will take effect. Next, proceed to section 7.2 to confirm your DSL sync.