Westell Technologies Versalink 327W - Manual (Page 42)

030-300500 Rev. A 42 October 2006
User Guide VersaLink™ Gateway (Model 327W)
IMPORTANT: After you enable Single Static IP, you must reboot your computer.
NOTE: If you chose to enable User Configured PC, wait for the Gateway to reset and then manually enter the
WAN IP, Gateway, and Subnet mask addresses you obtained from your Internet service provider into a PC.
12.1.2 Disabling Single Static IP – Single IP Address PassThrough
To disable Single Static IP, select Single Static IP from the Configuration menu. Click on disable.