Westell Technologies Versalink 327W User Manual
Page 54
Advertising
030-300500 Rev. A
54
October 2006
User Guide
VersaLink™ Gateway (Model 327W)
If you clicked OK in the preceding pop-up screen, the Host Device screen will be displayed. The Host Device
screen will allow you to select which device will host the NAT service you selected on your local area network. You
must either select the device from the Host Device drop-down arrow or type an IP address in the field labeled IP
Address. If you click on Cancel, the connection will be dynamically assigned. Click on done.
After you have selected a NAT service and you have saved it to your NAT service profile, the following screen will
be displayed. It shows which NAT service is active for the selected profile.
Advertising