Westell Technologies Versalink 327W User Manual
Page 94
030-300500 Rev. A
94
October 2006
User Guide
VersaLink™ Gateway (Model 327W)
If you have made any changes to your VC settings, you need to save them. To save the new VC settings, click on
OK when asked Set this PPPoE VC configuration? If you click on cancel, the new VC settings will not be saved.
If you clicked on OK in the preceding pop-up screen, the following pop-up screen will appear. VersaLink must be
reset to allow the new configuration to take effect. Click OK.
If you clicked OK in the preceding screen, the following screen will be displayed. VersaLink will be reset and the
new configuration will take effect.
After a brief delay, the home page will be displayed. Confirm that you have a DSL sync and that your PPP session
displays UP. (Click on the connect button to establish a PPP session).