Westell Technologies Versalink 327W - Manual (Page 82)

030-300500 Rev. A 82 October 2006
User Guide VersaLink™ Gateway (Model 327W)
Seconds must be between 0 and 59 Check the Seconds field at DHCP Lease Time
Minutes must be between 0 and 59 Check the Minutes field at DHCP Lease Time
Hours must be between 0 and 23 Check the Hours field at DHCP Lease Time
If you clicked on OK in the Load new Public LAN configuration? screen, the following pop-up screen will be
displayed. This will allow the modem to be reset and the new configuration will take effect. Click on OK.
If you clicked on OK in the preceding screen, the following screen will be displayed. VersaLink will be reset and
the new configuration will take effect.
After a brief delay, the home page will be displayed. Confirm that you have a DSL sync and that your PPP session
displays UP. (Click on the connect button to establish a PPP session).
NOTE: Whenever the PPP Status displays DOWN, you do not have a PPP session established. If your Gateway’s
connection setting is set to “Always On,” after a brief delay the PPP session will be established automatically and
the PPP Status will display UP. If the connection setting is set to “Manual,” you must click on the Connect button
to establish a PPP session. Once the PPP session has been established (PPP Status displays UP), you may proceed
with your Gateway’s configuration.