Westell Technologies Versalink 327W - Manual (Page 120)

030-300500 Rev. A 120 October 2006
User Guide VersaLink™ Gateway (Model 327W)
13.6 Enabling Static NAT
Before you enable static NAT, you must select Default from the Current Profile drop-down box. Static NAT must
be configured for the Gateway’s default account profile. After you select the default profile, click the static NAT
button.
NOTE: In the following screen, the default account profile is labeled Default. However, if you have renamed the
default account profile, you must select the profile name you created as the default profile.
If you click on the static NAT button in the Service Configuration screen, the following screen will be displayed.
Select your device from the Static NAT Device drop-down arrow, or type the IP address of the device in the field
labeled IP Address. Click on enable. This will automatically enable the Static NAT feature for that device.