Westell Technologies Versalink 327W - Manual (Page 95)

030-300500 Rev. A 95 October 2006
User Guide VersaLink™ Gateway (Model 327W)
12.6.4 Configuring VersaLink’s Protocol Settings for PPPoE Mode
To configure VersaLink’s protocol settings for PPPoE mode, select WAN from the Advanced WAN menu. The WAN
Configuration screen will be displayed. Next, click on the edit button adjacent to any of the existing ‘Enabled’ VC
(Virtual Connection) protocols.
NOTE: The protocol status must display “Enable” to allow edits to its VC configuration.