Westell Technologies Versalink 327W - Manual (Page 58)

030-300500 Rev. A 58 October 2006
User Guide VersaLink™ Gateway (Model 327W)
If you want to save your new firewall settings, click save in the screen labeled User Define Firewall Rules.
NOTE: Westell recommends that you do not change the settings in the User Defined Firewall Rules screen. If you
need to reset VersaLink to factory default settings, push the reset button on the rear of VersaLink.
If you clicked save in the User Define Firewall Rules screen, the following pop-up screen will be displayed. Click
OK when asked Do you wish to save these Rules to Flash and switch you Security Level to “User”? This will
save your new firewall settings. If you click Cancel, your new firewall settings will not be saved.
NOTE: The information displayed in this screen
depends on the level of security you have selected.