Welch Allyn PROPAQ CS - Manual (Page 15)

Service Manual Overview 11
Service test screens
There are two Acuity Wireless options available:
1. 2.4 GHz radio card (002-0150-00)
2. 5 GHz radio card (002-0160-00)
The following service screens illustrate the 2.4 GHz radio card and the 5 GHz radio card
diagnostic information.
Network Status screen (2.4 GHz radio card)
To access this screen, from the Main Menu press SETUP > MORE > MORE > SERVICE >
YES > MORE > MORE > RADIO STATUS.
Caution The 2.4 GHz and 5 GHz radio cards are not interchangeable.
Replacement of the radio card in the wrong configuration will cause permanent
damage to the radio card and/or monitor hardware.
NETWORK STATUS
BR
TEMP 100.4
98.6
1.8
97
( 15)
mmHg
(M)
25
9
S
D
NIBP
( 85)
mmHg
(M)
%
F
122
58
MCO 2
S p O 2
mmHg
38
Br/m
S
D
NETWORK
MONITOR
T1
T2
ΔT
PREVIOUS
MENU
BATTERY: 9.2 VOLTS
12
FIRMWARE VER:
S24 COUNTRY:
NET NAME:
MONITOR MAC:
MONITOR IP:
AP MAC:
ACUITY IP:
PSICP
RSSI:
ACUITY CONNECTED
V4.57 991001
INTERNATIONAL MODE 0
com.protocol
12:34:56:78:90:12
123.456.789.012:12345
12:34:56:78:90:12
123.456.789.012:12345
RX: 40 TX: 158
47