Overview, Purpose and scope, Other applicable documents – Welch Allyn PROPAQ CS User Manual
Page 9: Unpacking procedure, 2 - overview
2
5
Overview
Purpose and scope
The Propaq CS Service Manual is intended as a reference for monitor maintenance and
repair to the field-replaceable unit (FRU) level (
“Field Replaceable Units (FRUs)”
page 129). This manual provides the technically qualified service person with
troubleshooting information, repair procedures, and calibration and performance
verification instructions. A technical overview of the monitor subsystems is provided as an
introduction to the device’s circuitry and pneumatics.
This manual is intended for the technically qualified service person. Service training
classes on Welch Allyn’ products are available. Contact Welch Allyn Technical Service
(
) for information.
Other applicable documents
Several other documents are available for the Propaq CS monitor. Refer to those
documents for other than maintenance and repair information. Check the Propaq CS
Directions For Use for information on other user’s documentation.
Unpacking procedure
Use the following guidelines when unpacking the monitor from its shipping carton.
1.
Before opening the monitor shipping carton, check it for damage.
2.
If damage is apparent, stop unpacking the carton and contact the shipping company
for further instructions. If the carton is intact, unpack the monitor.
3.
With the monitor out of its carton, check to see that all the items listed on the packing
slip (provided with shipment) are in the shipping carton.
4.
If an item is missing, first recheck the carton, then check with your receiving
department. If necessary, contact Welch Allyn at the address and phone number
shown in
Save the shipping carton and packing material for repacking the monitor in case it needs to be sent to a
repair center or back to Welch Allyn for service.
Title
Part Number
Propaq CS Directions For Use, English
810-2689-XX
Products & Accessories Booklet
810-0409-XX