Identifying the acuity communication options, Monitor controls, Self test and service menus – Welch Allyn PROPAQ CS User Manual
Page 13
Service Manual
Overview
9
Identifying the Acuity Communication options
Monitor controls
Self test and service menus
The Propaq CS monitor includes built-in self-tests that verify the integrity of its hardware
and software each time you turn it on. If the monitor turns on and displays the Main
Menu, all self-tests were passed. If a self-test results in a failure, a message and error
code are displayed indicating the failure mode. Refer to
on page 55 and
contact Welch Allyn Technical Support for help.
DEFIB SYNCHRO
MONITOR
EKG x 1000
!
3A
2AG
!
!
!
12-28V, 3A
Hardwired Acuity option
is identified by the Acuity
connector jack on the
monitor right side panel.
Wireless Acuity option is identified by
the yellow antenna cap on the top corner
of the monitor.
Mainstream
CO
2
Option
Nurse Call
option
Printer Buttons
Alarm(s) Off Light
Alarm Light
Sidestream
CO
2
Option
Printer Option
SpO
2
Option
Starts or stops NIBP
reading
Suspend/
Resume Alarm
Returns the display to
the Main Menu
Suspends alarm tone for
90 seconds or resumes
alarm tone (if active)
Start/
Stop NIBP
Home