ZyXEL Communications ZyXEL ZyWALL P1 - Manual (Page 145)

ZyWALL P1 User’s Guide
144 Chapter 9 VPN Screens
9.8.2.1 Activating a VPN Connection
After you have configured a VPN rule, click the connect icon ( ) in the VPN Rule (IKE)
screen to establish a VPN tunnel. A VPN Activation screen displays as shown.
Figure 56 VPN Rule (IKE): VPN Activation
The following table describes the labels in this screen.
9.9 Viewing SA Monitor
In the web configurator, click VPN and the SA Monitor tab. Use this screen to display and
manage active VPN connections.
A Security Association (SA) is the group of security settings related to a specific VPN tunnel.
This screen displays active VPN connections. Use Refresh to display active VPN
connections. This screen is read-only. The following table describes the fields in this tab.
Enable Multiple
Proposal
Select this check box to allow the ZyWALL to use any of its phase 1 or phase 2
encryption and authentication algorithms when negotiating an IKE SA.
Clear this check box to have the ZyWALL use only the phase 1 or phase 2
encryption and authentication algorithms configured below when negotiating an
IKE SA.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard all changes and return to the main VPN screen.
Table 44 VPN Rules (IKE): Add Policy (continued)
LABEL DESCRIPTION
Table 45 VPN Rule (IKE): VPN Activation
LABEL DESCRIPTION
user Name Enter the user name for this VPN connection.
Password Enter the password associated to the user name above.
Activate Click Activate to establish a VPN connection.
Cancel Click Cancel to discard all changes and return to the VPN Rule (IKE) screen.