ZyXEL Communications ZyXEL ZyWALL P1 - Manual (Page 55)

ZyWALL P1 User’s Guide
54 Chapter 3 Wizard Setup
.
3.2.2.5 PPPoE Encapsulation
Point-to-Point Protocol over Ethernet (PPPoE) functions as a dial-up connection. PPPoE is an
IETF (Internet Engineering Task Force) draft standard specifying how a host personal
computer interacts with a broadband modem (for example xDSL, cable, wireless, etc.) to
achieve access to high-speed data networks. It preserves the existing Microsoft Dial-Up
Networking experience and requires no new learning or procedures.
For the service provider, PPPoE offers an access and authentication method that works with
existing access control systems (for instance, Radius). For the user, PPPoE provides a login
and authentication method that the existing Microsoft Dial-Up Networking software can
activate, and therefore requires no new learning or procedures for Windows users.
One of the benefits of PPPoE is the ability to let end users access one of multiple network
services, a function known as dynamic service selection. This enables the service provider to
easily create and offer new IP services for specific users.
Operationally, PPPoE saves significant effort for both the subscriber and the ISP/carrier, as it
requires no specific configuration of the broadband modem at the subscriber’s site.
Table 9 Internet Access Wizard: Ethernet Encapsulation
LABEL DESCRIPTION
ISP Parameters for Internet Access
Encapsulation You must choose the Ethernet option when the WAN port is used as a regular
Ethernet.
Note: You can select a service type in the advanced WAN screen
(refer to Section 5.3 on page 80 ).
WAN IP Address
Assignment
Select Dynamic If your ISP did not assign you a fixed IP address. This is the
default selection.
Select Static If your ISP assigned a fixed IP address. The set the following fields.
My WAN IP
Address
Enter your WAN IP address in this field if you select Static in the WAN IP Address
Assignment field.
My WAN IP
Subnet Mask
Enter the IP subnet mask in this field if you select Static in the WAN IP Address
Assignment field.
Gateway IP
Address
Enter the gateway IP address in this field if you select Static in the WAN IP
Address Assignment field.
First/Second DNS
Server
DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa, e.g., the IP address of www.zyxel.com is 204.217.0.2. The
DNS server is extremely important because without it, you must know the IP
address of a computer before you can access it.
Enter the IP address(es) of the DNS server(s) provided by your ISP.
Finish Click Finish to save the settings.