ZyXEL Communications ZyXEL ZyWALL P1 - Manual (Page 268)

ZyWALL P1 User’s Guide
Chapter 18 Troubleshooting 267
18.7 Problems with Remote Management
Table 103 Troubleshooting Telnet
PROBLEM CORRECTIVE ACTION
Cannot access the
ZyWALL from the
LAN or WAN.
Refer to Section 15.1.1 on page 232 for scenarios when remote management
may not be possible.
When NAT is enabled:
•
Use the ZyWALL's WAN IP address when configuring from the WAN.
• Use the ZyWALL's LAN IP address when configuring from the LAN.
Refer to Section 18.3 on page 265 for instructions on checking your LAN
connection.
Refer to Section 18.4 on page 266 for instructions on checking your WAN
connection.