ZyXEL Communications ZyXEL ZyWALL P1 - Manual (Page 48)

ZyWALL P1 User’s Guide
Chapter 2 Introducing the Web Configurator 47
Figure 9 Home : Show Statistics
The following table describes the labels in this screen.
2.4.4 DHCP Table Screen
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the
ZyWALL as a DHCP server or disable it. When configured as a server, the ZyWALL provides
the TCP/IP configuration for the DHCP client. If DHCP service is disabled, you must have
another DHCP server on your LAN, or else the computer must be manually configured.
Click Show DHCP Table in the HOME screen. Read-only information here relates to your
DHCP status. The DHCP table shows current DHCP client information (including IP
Address, Host Name and MAC Address) of the network client using the ZyWALL’s DHCP
server.
Table 5 Home: Show Statistics
LABEL DESCRIPTION
Port This is the WAN or LAN port.
Status This displays the port speed and duplex setting if you’re using Ethernet
encapsulation and Down (line is down), Idle (line (ppp) idle), Dial (starting to trigger
a call) or Drop (dropping a call) if you’re using PPPoE encapsulation.
TxPkts This is the number of transmitted packets on this port.
RxPkts This is the number of received packets on this port.
Collisions This is the number of collisions on this port.
Tx B/s This displays the transmission speed in bytes per second on this port.
Rx B/s This displays the reception speed in bytes per second on this port.
Up Time This is the total amount of time the line has been up.
System Up Time This is the total time the ZyWALL has been on.
Poll Interval(s) Enter the time interval for refreshing statistics in this field.
Set Interval Click this button to apply the new poll interval you entered in the Poll Interval(s)
field.
Stop Click Stop to stop refreshing statistics.