ZyXEL Communications ZyXEL ZyWALL P1 - Manual (Page 46)

ZyWALL P1 User’s Guide
Chapter 2 Introducing the Web Configurator 45
Table 4 Navigation Panel: Menu Summary
LINK TAB FUNCTION
HOME This screen shows the ZyWALL’s general device and network
status information. Use this screen to access the wizards, statistics
and DHCP table.
LAN LAN Use this screen to configure LAN DHCP and TCP/IP settings.
Static DHCP Use this screen to assign fixed IP addresses on the LAN.
WAN Route This screen allows you to configure route priority and traffic redirect
properties.
WAN Use this screen to configure ZyWALL WAN port for internet
access.
DDNS Use this screen to configure dynamic DNS settings.
FIREWALL Default Rule Use this screen to activate/deactivate the firewall and the direction
of network traffic to which to apply the rule
Rule Summary This screen shows a summary of the firewall rules, and allows you
to edit/add a firewall rule.
Anti-Probing Use this screen to change your anti-probing settings.
Threshold Use this screen to configure the threshold for DoS attacks.
VPN VPN Rules
(IKE)
Use this screen to configure VPN connections using IKE and view
the rule summary.
SA Monitor Use this screen to display and manage active VPN connections.
Global Setting Use this screen to set the VPN traffic and gateway domain name
update timers
CERTIFICATES My Certificates Use this screen to view a summary list of certificates and manage
certificates and certification requests.
Trusted CAs Use this screen to view and manage the list of the trusted CAs.
Trusted
Remote Hosts
Use this screen to view and manage the certificates belonging to
the trusted remote hosts.
Directory
Servers
Use this screen to view and manage the list of the directory
servers.
NAT NAT Overview Use this screen to enable NAT.
Port
Forwarding
Use this screen to configure servers behind the ZyWALL.
Port Triggering Use this screen to change your ZyWALL’s port triggering settings.
STATIC ROUTE IP Static Route Use this screen to configure IP static routes.