ZyXEL Communications ZyXEL ZyWALL P1 - Manual (Page 89)

ZyWALL P1 User’s Guide
88 Chapter 5 WAN Screens
5.4.2 Configuring Dynamic DNS
To change your ZyWALL’s DDNS, click WAN, then the DDNS tab. The screen appears as
shown.
Figure 29 WAN: DDNS
The following table describes the labels in this screen.
Table 25 WAN: DDNS
LABEL DESCRIPTION
Account Setup
Enable DDNS Select this check box to use dynamic DNS.
Service Provider This is the name of your Dynamic DNS service provider.
DDNS Type Select the type of service that you are registered for from your Dynamic DNS
service provider.
Select Dynamic DNS if you have the Dynamic DNS service.
Select Static DNS if you have the Static DNS service.
Select Custom DNS if you have the Custom DNS service.
Username Enter your user name. You can use up to 31 alphanumeric characters (and the
underscore). Spaces are not allowed.
Password Enter the password associated with the user name above. You can use up to 31
alphanumeric characters (and the underscore). Spaces are not allowed.
Domain Name 1~3 Enter the host names in these fields.
Enable Wildcard
Options
Select the check box to enable DYNDNS Wildcard.