ZyXEL Communications ZyXEL ZyWALL P1 - Manual (Page 192)

ZyWALL P1 User’s Guide
Chapter 13 Remote Management 191
C
H A P T E R
13
Remote Management
This chapter provides information on the Remote Management screens.
13.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which
ZyWALL interface (if any) from which computers.
Note: When you configure remote management to allow management from the WAN,
you still need to configure a firewall rule to allow access. See Chapter 7 on
page 103 for details on configuring firewall rules.
You may manage your ZyWALL from a remote location via:
Note: When you choose WAN only or LAN & WAN, you still need to configure a
firewall rule to allow access.
To disable remote management of a service, select Disable in the corresponding Server
Access field.
You may only have one remote management session running at a time. The ZyWALL
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 SSH
2 Telnet
3 HTTPS and HTTP
13.1.1 Remote Management Limitations
1 Remote management over LAN or WAN will not work when:
2 A filter is applied to block a Telnet, FTP or Web service.
3 You have disabled that service in one of the remote management screens.
• Internet (WAN only) • ALL (LAN&WAN)
• LAN only,
• Neither (Disable).