ZyXEL Communications ZyXEL ZyWALL P1 - Manual (Page 189)

ZyWALL P1 User’s Guide
188 Chapter 12 Static Route
Figure 84 Static Route
The following table describes the labels in this screen.
12.2.1 Configuring a Static Route Entry
Select a static route index number and click Edit. The screen shown next appears. Fill in the
required information for each static route.
Table 68 Static Route
LABEL DESCRIPTION
# This is the number of an individual static route.
Name This is the name that describes or identifies this route.
Active This field shows whether this static route is active (Yes) or not (No).
Destination This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
Gateway This is the IP address of the gateway. The gateway is a router or switch on the same
network segment as the device's LAN or WAN port. The gateway helps forward
packets to their destinations.
Edit Select the radio button next to a static route index number and then click Edit to set
up a static route on the ZyWALL.
Delete Select the radio button next to a static route index number and then click Delete to
remove a static route on the ZyWALL.