ZyXEL Communications ZyXEL ZyWALL P1 - Manual (Page 217)

ZyWALL P1 User’s Guide
216 Chapter 14 UPnP
All UPnP-enabled devices may communicate freely with each other without additional
configuration. Disable UPnP if this is not your intention.
14.2 UPnP and ZyXEL
ZyXEL has achieved UPnP certification from the Universal Plug and Play Forum Creates
UPnP™ Implementers Corp. (UIC). ZyXEL's UPnP implementation supports IGD 1.0
(Internet Gateway Device). At the time of writing ZyXEL's UPnP implementation supports
Windows Messenger 4.6 and 4.7 while Windows Messenger 5.0 and Xbox are still being
tested.
The ZyWALL only sends UPnP multicasts to the LAN .
Please see later in this User’s Guide for examples of installing UPnP in Windows XP and
Windows Me as well as an example of using UPnP in Windows.
14.3 Configuring UPnP
Click UPnP to display the screen shown next.
Figure 110 Configuring UPnP
The following table describes the fields in this screen.
Table 78 Configuring UPnP
LABEL DESCRIPTION
UPnP Setup
Device Name This identifies the ZyWALL in UPnP applications.
Enable the Universal
Plug and Play (UPnP)
feature
Select this checkbox to activate UPnP. Be aware that anyone could use a
UPnP application to open the web configurator's login screen without
entering the ZyWALL's IP address (although you must still enter the
password to access the web configurator).