ZyXEL Communications ZyXEL ZyWALL P1 - Manual (Page 154)

ZyWALL P1 User’s Guide
Chapter 10 Certificates 153
Figure 62 VPN: My Certificates
The following table describes the labels in this screen.
Table 50 Certificate: My Certificates
LABEL DESCRIPTION
PKI Storage
Space in Use
This bar displays the percentage of the ZyWALL’s PKI storage space that is
currently in use. When you are using 80% or less of the storage space, the bar is
green. When the amount of space used is over 80%, the bar is red. When the bar
is red, you should consider deleting expired or unnecessary certificates before
adding more certificates.
Replace This button displays when the ZyWALL has the factory default certificate. The
factory default certificate is common to all ZyWALLs that use certificates. ZyXEL
recommends that you use this button to replace the factory default certificate with
one that uses your ZyWALL's MAC address.
# This field displays the certificate index number. The certificates are listed in
alphabetical order.
Name This field displays the name used to identify this certificate. It is recommended that
you give each certificate a unique name.
Type This field displays what kind of certificate this is.
REQ represents a certification request and is not yet a valid certificate. Send a
certification request to a certification authority, which then issues a certificate. Use
the My Certificate Import screen to import the certificate and replace the request.
SELF represents a self-signed certificate.
*SELF represents the default self-signed certificate, which the ZyWALL uses to
sign imported trusted remote host certificates.
CERT represents a certificate issued by a certification authority.
Subject This field displays identifying information about the certificate’s owner, such as CN
(Common Name), OU (Organizational Unit or department), O (Organization or
company) and C (Country). It is recommended that each certificate have unique
subject information.