ZyXEL Communications LAYER 3 ES-3124 - Manual (Page 248)

ES-3124 User’s Guide
246 Chapter 34 Introducing Commands
34.11.3 General Configuration Mode
The following table lists the commands in Configuration (or Config) mode.
cable-
diagnosti
cs
<port-list> Performs a basic connectivity test
on the ports. Displays “Ok” if
connector is inserted in the port,
“Open” if no connector is inserted
in the port or “Unknown” if this test
cannot determine the status.
13
ping <ip|host-name> Sends Ping request to an Ethernet
device.
13
[vlan <vlan-
id>][..]
Sends Ping request to an Ethernet
device in the specified VLAN(s).
13
help Displays command help
information.
13
tracerout
e
<ip|host-name>
[in-band|out-of-
band|vlan <vlan-
id>][ttl <1-
255>] [wait <1-
60>] [queries
<1-10>]
Determines the path a packet
takes to a device.
13
help Displays command help
information.
13
ssh <1|2>
<[user@]dest-ip>
Connects to an SSH server with
the specified SSH version.
13
[command </>] Connects to an SSH server with
the specified SSH version and
addition commands to be
executed on the server.
13
Table 83 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 84 Command Summary: Configuration Mode
COMMAND DESCRIPTION PRIVILEGE
help Displays help information. 13
logout Exits from the CLI. 13
history Displays a list of previous
command(s) that you have
executed.
13
exit Exits from Config mode into
Enable mode.
13
mode zynos Changes the CLI mode to the
ZyNOS format.
13
password <password> Change the password for
accessing Enable mode.
14