ZyXEL Communications LAYER 3 ES-3124 - Manual (Page 255)

ES-3124 User’s Guide
Chapter 34 Introducing Commands 253
classifier <name>
<[ packet-format
<802.3untag|802.
3tag|EtherIIunta
g|EtherIItag> ]
[ priority <0-7>
] [
vlan <vlan-id> ]
[ ethernet-type
<ether-
num|ip|ipx|arp|r
arp|appletalk|de
cnet|sna|netbios
|dlc> ] [
source-mac <src-
mac-addr> ]
[ source-port
<port-num> ]
[ destination-
mac <dest-mac-
addr> ] [
dscp <0-63> ]
[ ip-protocol
<protocol-
num|tcp|udp|icmp
|egp|ospf|rsvp|i
gmp|igp|pim|ipse
c> [establish-
only] ] [
source-ip <src-
ip-addr> [mask-
bits <mask-
bits>] ] [
source-socket
<socket-num> ]
[ destination-ip
<dest-ip-addr>
[mask-bits
<mask-bits>] ]
[ destination-
socket <socket-
num> ] [
inactive ] >
Configures a classifier. A
classifier groups traffic into data
flows according to specific criteria
such as the source address,
destination address, source port
number, destination port number
or incoming port number.
13
Table 84 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE