ZyXEL Communications LAYER 3 ES-3124 - Manual (Page 261)

ES-3124 User’s Guide
Chapter 34 Introducing Commands 259
34.11.4 interface port-channel Commands
The following table lists the interface port-channel commands in configuration mode.
Use these commands to configure the ports.
option Allows the switch to add DHCP
relay agent information.
13
information Allows the switch to add system
name to agent information.
13
diffserv Enables DiffServ on the switch. 13
dscp <0-63> priority <0-7> Maps DSCP value with an 802.1p
value.
13
Table 84 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 85 interface port-channel Commands
COMMAND DESCRIPTION PRIVILEGE
interface
port-
channel
<port-
list>
Enables a port or a list of ports for
configuration.
13
weight <wt1>
<wt2> ... <wt8>
Sets the interface to use WFQ
weighting. A weight value of one to
eight is given to each variable from
wt 1 to wt 8.
13
egress set
<port-list>
Sets the outgoing traffic port list for
a port-based VLAN.
13
igmp-immediate-
leave
Enables IGMP immediate leave on
the port.
13
igmp-filtering
profile <name>
Sets the IGMP filtering profile for
this port.
13
igmp-group-
limited
Limits the number of multicast
groups.
13
igmp-group-
limited number
<number>
Sets the number of multicast
groups this port is allowed to join.
13
igmp-querier-
mode
<auto|fixed|edg
e>
Sets the IGMP querier mode of a
port.
Selects
auto to treat the IGMP
queries normally, fixed to
always treat the port as a querier
port no matter there is a query or
edge to treat the port as a non-
querier port which drops any IGMP
queries received.
13