ZyXEL Communications LAYER 3 ES-3124 - Manual (Page 71)

ES-3124 User’s Guide
Chapter 6 System Status and Port Statistics 69
LACP This field shows if LACP is enabled on this port or not.
TxPkts This field shows the number of transmitted frames on this port
RxPkts This field shows the number of received frames on this port
Errors This field shows the number of received errors on this port.
Tx KB/s This field shows the number kilobytes per second transmitted on this port.
Rx KB/s This field shows the number of kilobytes per second received on this port.
Up Time This field shows the total amount of time the connection has been up.
Tx Packet
The following fields display detailed information about packets transmitted.
TX Packet This field shows the number of good packets (unicast, multicast and broadcast)
transmitted.
Multicast This field shows the number of good multicast packets transmitted.
Broadcast This field shows the number of good broadcast packets transmitted.
Pause This field shows the number of 802.3x Pause packets transmitted.
Tagged This field shows the number of packets with VLAN tags transmitted.
Rx Packet
The following fields display detailed information about packets received.
RX Packet This field shows the number of good packets (unicast, multicast and broadcast)
received.
Multicast This field shows the number of good multicast packets received.
Broadcast This field shows the number of good broadcast packets received.
Pause This field shows the number of 802.3x Pause packets received.
Control This field shows the number of control received (including those with CRC error) but it
does not include the 802.3x Pause frames.
TX Collision
The following fields display information on collisions while transmitting.
Single This is a count of successfully transmitted frames for which transmission is inhibited by
exactly one collision.
Multiple This is a count of successfully transmitted frames for which transmission was inhibited
by more than one collision.
Excessive This is a count of frames for which transmission failed due to excessive collisions.
Excessive collision is defined as the number of maximum collisions before the
retransmission count is reset.
Late This is the number of times a late collision is detected, that is, after 512 bits of the
frame have already been transmitted.
Error Packet
RX CRC This field shows the number of packets received with CRC (Cyclic Redundant Check)
error(s).
Length This field shows the number of frames received with a length that was out of range.
Runt This field shows the number of packets received that were too short (shorter than 64
octets), including the ones with CRC errors.
Distribution
Table 7 Status: Port Details (continued)
LABEL DESCRIPTION