ZyXEL Communications LAYER 3 ES-3124 - Manual (Page 265)

ES-3124 User’s Guide
Chapter 34 Introducing Commands 263
34.11.5 config-vlan Commands
The following table lists the vlan commands in configuration mode.
Table 86 Command Summary: config-vlan Commands
COMMAND DESCRIPTION PRIVILEGE
vlan <1-
4094>
Creates a new VLAN group. 13
name <name-str> Specifies a name for identification
purposes.
13
normal <port-
list>
Specifies the port(s) to dynamically
join this VLAN group using GVRP
13
fixed <port-
list>
Specifies the port(s) to be a
permanent member of this VLAN
group.
13
forbidden <port-
list>
Specifies the port(s) you want to
prohibit from joining this VLAN
group.
13
untagged <port-
list>
Specifies the port(s) you don’t want
to tag all outgoing frames
transmitted with this VLAN Group
ID.
13
inactive Disables the specified VLAN. 13
help Displays a list of available VLAN
commands.
13
no fixed <port-
list>
Sets fixed port(s) to normal port(s). 13
forbidden
<port-list>
Sets forbidden port(s) to normal
port(s).
13
untagged <port-
list>
Enables VLAN tagging for outgoing
traffic on the specified port(s).
13
inactive Enables the specified VLAN. 13
ip address
inband-default
dhcp-bootp
Sets the default in-band interface
to use a static IP address in this
VLAN.
The switch will use the default IP
address of 0.0.0.0 if you do not
configure a static IP address.
13
ip address <ip-
address> <mask>
Deletes the IP address and subnet
mask from this VLAN.
13
ip address
default-gateway
Deletes the default gateway from
this VLAN.
13
exit Leaves the VLAN configuration
mode.
13
ip address inband-default
dhcp-bootp
Sets the dynamic in-band IP
address.
13