6 mvr commands, Table 87 mvr commands – ZyXEL Communications LAYER 3 ES-3124 User Manual
Page 266
ES-3124 User’s Guide
264
Chapter 34 Introducing Commands
34.11.6 mvr Commands
The following table lists the
mvr
commands in configuration mode.
inband-default
dhcp-bootp
release
Releases the dynamic in-band IP
address.
13
inband-default
dhcp-bootp
renew
Updates the dynamic in-band IP
address.
13
inband-default
<ip-address>
<mask>
Sets a static in-band IP address
and subnet mask.
13
<ip-address>
<mask>
manageable
Sets the management IP address
and subnet mask of the switch in
the specified VLAN.
13
<ip-address>
<mask>
Sets the IP address and subnet
mask of the switch in the specified
VLAN.
13
default-gateway
<ip-address>
Sets a default gateway IP address
for this VLAN.
13
Table 86 Command Summary: config-vlan Commands (continued)
COMMAND
DESCRIPTION
PRIVILEGE
Table 87 mvr Commands
COMMAND
DESCRIPTION
PRIVILEGE
mvr <1-
4094>
Enters the MVR (Multicast VLAN
Registration) configuration mode.
13
source-port
<port-list>
Sets the source port(s).
An MVR source port can send and
receive multicast traffic in a
multicast VLAN.
13
receiver-port
<port-list>
Sets the receiver port(s).
An MVR receiver port can only
receive multicast traffic in a
multicast VLAN.
13
inactive
Disables MVR settings.
13
mode
<dynamic|compati
ble>
Sets the MVR mode (
dynamic
or
compatible
).
13
name <name-str>
Sets the MVR name for
identification purposes.
13
tagged <port-
list>
Sets the port(s) to tag VLAN tags. 13