ZyXEL Communications LAYER 3 ES-3124 - Manual (Page 275)

ES-3124 User’s Guide
Chapter 35 User and Enable Mode Commands 273
Note: When you use the write memory command without specifying a configuration
file index number, the switch saves the changes to the configuration file the
switch is currently using.
35.6.2 Resetting to the Factory Default
Follow the steps below to reset the switch back to the factory defaults.
1 Enter erase running config to reset the current running configuration.
2 Enter write memory to save the changes to the current configuration file. If you want to
reset the second configuration file, use the write memory command again with the
specified index number.
The following example resets both configuration files to the factory default settings.
ras# erase running-config
ras# write memory
ras# write memory 2