150v to 600v models, Strip 0.4in. (10mm) at the ends of the wires, Insert load wire in strain relief – Xantrex Technology XFR 2800 User Manual

Page 51: Tighten the strain relief clamp, Replace the top cover, Figure 2.6 output voltage connector, For 150v to 600v models.), Figure 2.6

Advertising
150v to 600v models, Strip 0.4in. (10mm) at the ends of the wires, Insert load wire in strain relief | Tighten the strain relief clamp, Replace the top cover, Figure 2.6 output voltage connector, For 150v to 600v models.), Figure 2.6 | Xantrex Technology XFR 2800 User Manual | Page 51 / 90 150v to 600v models, Strip 0.4in. (10mm) at the ends of the wires, Insert load wire in strain relief | Tighten the strain relief clamp, Replace the top cover, Figure 2.6 output voltage connector, For 150v to 600v models.), Figure 2.6 | Xantrex Technology XFR 2800 User Manual | Page 51 / 90
Advertising
See also other documents in the category Xantrex Technology Tools: