Xantrex Technology XFR 2800 - Manual (Page 24)

Features and Specifications
Rear Panel Connectors and Switch
22 Operating Manual for XFR 2.8kW Series Power Supply
Rear Panel J2
Connector
The J2 Programming and Monitoring connector is a 15-terminal wire clamp
connector located on the power supply’s rear panel. See Figure 1.4. The J2 connector
provides access to the following functions:
• Remote programming of output voltage AND/OR current limit
• Remote monitoring of calibrated readback signals for output voltage and output
current
• Remote control of the shutdown function using a 2.5 V to 15 V signal
Figure 1.4 Programming and Monitoring J2 Connector
See Table 1.3 for the list of the J2 connector terminal numbers, their references, and
corresponding functions.
1 Remote Output Voltage Programming Select
2 Remote Output Current Limit Programming Select
3 Control Ground
4 No connection
5 Voltage Program Signal Return
6 Output Voltage Programming Input
7 Current Program Signal Return
8 Output Current Limit Programming Input
9 Voltage Monitor Signal Return
10 Output Voltage Monitor
11 Current Monitor Signal Return
12 Output Current Monitor
13 No connection
14 Shutdown (S/D) Signal Return (–)
15 S/D Input (+)